Dji Mini Controler Grip

By 1-prop-head

929
0
Free
It's free to download
Main Image
Preview Image Preview Image

Technical

I printed this using ABS in three parts. Then I solvent cemented them together. During the print using pause at height you need to install a 3mm nut in the top piece and using a flat head 3 mm machine screw you attach the remaining two parts to the top. Then solvent cement the whole thing as one piece.
Alternatively you could use a raft and support and print the entire part in one  go.
Two small flat head machine screws are required to fasten the grip to the back of the controller.

License

39 objects 39 Followers
Joined about 9 years ago United States O-HI-O both states

I tinker a lot Like to solve issues one encounters every day. Do it in software Fortunately I can fix most anything and the 3D printer is my favorite go to tool. If you skip class don't skip physics, if you do skip physics you might skip theoretic...

YouMagine

a MyMiniFactory company
© 2024 YouMagine. All rights reserved.  2 Berners Road, Islington, London, N1 0PW, United Kingdom