Home /   elwin /   Designs /   Diamond Tree
Diamond Tree

Printable files

  1 file View

Diamond Tree

Published at 2024-05-03

By Elwin

Free
★ ★ ★ ★ ☆ (3 comments)
58

Elwin

1 objects 3 Followers
Joined about 10 years ago elwin_van_der_hoek@hotmail.com

Description

A super easy and fast tree to print if you just use these settings Single wall print Thickness: 0.8mm Nozzle: 0.4mm Fill: 0% Temperature: 220 Speed: 30mm/s Bottom/Top Thickness: 0mm Use Spiral function if available Here is the trick to get a nice clean top of the tree. Tweak settings for the last 10mm of your print by using the tweak at z pugin in CURA (oh how I love CURA!!) Speed 50% of original speed (15mm/s) Lower the temp with 10 degrees to 210 decrease the flow by 10% to 90% of original flow If you don't alter these settings, most of the time the top of the tree will droop down/inside. Enjoy your print and merry Christmas!!

Comments

You need to be signed in before commenting.
Jankeesvw
Jankeesvw
over 6 years
Going to print a few for Christmas!
Elwin
Elwin
about 10 years
Hey Neil, Thanks for your reaction. We hope it came out great and shines at your Christmas dinner table! Enjoy the Holidays!!
neilblue
neilblue
about 10 years
If I can print this on my doggy printer anyone can. Thanks for the detailed instructions!

© 2024 YouMagine. All rights reserved.  2 Berners Road, Islington, London, N1 0PW, United Kingdom
Enjoy a 20% sitewide
Discount at checkout
️Get a 20% Discount