1x https://smile.amazon.com/gp/product/B00QTE09SY/ 2x https://smile.amazon.com/gp/product/B01JZW7FK6/ 4x narrow zip ties 1x 3d printed part (STL file is attached, I printed in PLA at 25% infill and 0.8mm wall thickness) The 3d printed part has pegs that line up with holes on the iron. Put them together, zip tie (line up zip ties with the notches on the 3d printed part), trim the ends of the ties, and you're ready to go. If you're feeling extra fancy, go ahead and zip tie the USB cables together in a couple of places (+$0.40).