Introducing our first RedCat Ascent Fusion upgrade the - Crawler Pro Sliders. These sliders solve a lot of the issues we’ve seen owners and reviews comment on. Our Ascent Fusion Crawler Pro Sliders include an improved battery mounting method, built-in splash proof receiver case and a spot to put the HobbyWing 2-in-1 power switch. Our Crawler Pro Sliders also get rid of that “extra” trailing bit slider from the back of the truck body. 

Features:

Length Wide Battery Strap: The biggest issue out of the box for the RedCat Ascent Fusion is the battery mount; batteries fall out and are never seen again. Our through-the-slider method allows the battery strap to hold the battery securely so it can’t slide out. 

Receiver Box: Your stock RedCat Ascent Fusion receiver or a full size receiver gets a new home. It goes into a splash proof (not waterproof, sorry, maybe later) case that makes sure it is protected from mud and other crawling hazards. There’s also two extra zip-tie anchors on the inside of the receiver box to neatly tie up your wires to keep them away from moving drive-shafts or the like. 

Power Switch: The Fusion’s HobbyWing 2-in-1 power switch also gets a new home; a simple press-in place mounting (with release hole) allows you to keep the power switch accessible and still out of the way of crawling hazards.

"Stock" - Receiver Box (inner dimensions): 
34mm x 21mm x 30mm (LxWxH)

"Full" - Receiver Box (inner dimensions):
39mm x 25mm x 30mm (LxWxH)

Measurements are approximate, add 1mm or 2mm to be safe for tight fits.

Hardware: Each Crawler Pro Slider set needs 2 x M3x10mm and 2x M2 x 8mm screws, along with about 20mm of 10mm (wide) by 5mm (tall) sealing foam. See https://www.amazon.com/gp/product/B08LCVW98V/ for what we used. 

Notes: For 3S batteries with a length less than 69mm the stock strap will fit. We recommend 300mm straps for those running larger 3S batteries.

Don't have a printer and still looking for these sliders? Checkout my Etsy store - https://sbiprints.etsy.com/