Description
Inspired by many vintage VW's and slammed trucks all around google. This is my take on this cool old truck.
200mm wide
257mm Wheelbase
The Wheelbase can lightly be adjusted by changing the length of the center pieces. Just remember to uncheck the "Constrain Proportions" so as to only change the length.
257mm Wheelbase
The Wheelbase can lightly be adjusted by changing the length of the center pieces. Just remember to uncheck the "Constrain Proportions" so as to only change the length.
I included the full one piece body as well.
The separate parts are oriented for the least supports.
The body can be held together using M2 screws and nuts while the glue dries. Most of the cuts were chosen where there would normally be seems so no filler would be needed in those areas.
The separate parts are oriented for the least supports.
The body can be held together using M2 screws and nuts while the glue dries. Most of the cuts were chosen where there would normally be seems so no filler would be needed in those areas.
The rear lenses can be printed in one or two parts.
in 2 parts = top in clear amber-Bottom in clear red using white LED's. This will give a more Vintage Look.
in 1 part print in clear and use Amber/Red coloured LED/s More modern
in 2 parts = top in clear amber-Bottom in clear red using white LED's. This will give a more Vintage Look.
in 1 part print in clear and use Amber/Red coloured LED/s More modern
front Lights...
Markers.. 10mm amber LED
Headlights....
Get 2 x 9 LED Flashlight at the $1 Store and use a pair of cutters to open up the LED section. Use the Lens and LED's and wire a 4.5 Volt source to them.
Markers.. 10mm amber LED
Headlights....
Get 2 x 9 LED Flashlight at the $1 Store and use a pair of cutters to open up the LED section. Use the Lens and LED's and wire a 4.5 Volt source to them.
Once the Front Light Bezels have been printed you snap the blue part off. See pictures.
Comments
You need to be signed in before commenting.
No comments yet, be the first
Join the conversation! Your voice matters. Share your thoughts, ideas, and feedback with us. Let's build a community together.
Free