Printed Components: 1 x Base 1 x Bearing_Perch 1 x Clamp_Main 1 x Clamp_Strap 2 x Spacer 1 x Spacer_Bearing 1 x Spacer_Yoke 1 x Yoke Non-Printed Components: 2 x 3/8" x 10" Carriage Bolts 7 x 3/8" Nuts 1 x 3/8" x 4" Bolt 1 x 1/4" x 1" Machine Screw (Pan Head) 1 x 1/4" Nut 2 x 8-32 x 1" Machine Screw (Pan Head) 2 x 8-32 x 1.5" Machine Screw (Pan Head / Cut to Approx. 1-1/8") 2 x 8-32 x 2" Machine Screw (Pan Head) 2 x 8-32 Nut 2 x 1-1/8" O.D. 3/8" I.D. Flanged Radial Bearing / 1-1/4" Flange Diameter 2 x Nylon Screen Door Roller - Flat Type - 3/4" Diameter Wheel, 8-32 Threaded (Optional) - 4 to 6 - No. 6 Pan Head Wood Screws For Mounting The Base Recommended Print Settings: - 25% Infill (Use More For Additional Strength) - 2 Line Shell Thickness - 210 Degrees Celsius Printing Temp - Support Should Be Used - STL Files Are Oriented For Printing Assembly: - Remove All Support Material - Ream All Through Holes Except For The Two Angled Ones In The Yoke - Assemble According To The Picture And The Assembly Diagram