Parts for the Dust Shoe: - Qty:20 = 8mm OD x 3mm thick neodymium magnets. They can be bought on ebay, aliexpress, or even your local hardware store for a couple dollars. - Qty:8 = 3mm bolts, or small screws to hold on the lower boot. - Qty:2 = 5mm nylok nuts. - Qty:2 = 5mm bolts to clamp the upper section on the spindle and around the shopvac hose. The major parts for the cyclone separator are: - Qty:2 = 5 Gallon Pails (the top one cut off 3" into the lower bucket). - Qty:1 = 5 Gallon Pail Lid. - Qty:3 = 2" Pipe Elbows. - Qty:1 = 2" Connection Union. - Qty:2 = Short Sections of 2" pipe. - Qty:2 = Small Pieces of 1/4" plywood cut to size on the supplied DXF. - Qty:2 = Section of 3/8" threaded rod. - Qty:8 = 3/8" Nylok Nuts. - Qty:8 = 3/8" Washers.