PLA You will need the following: - side_v1.stl or side_v2.stl: 11x - base.stl: 1x - connector.stl: 20x - screw.stl: 60x - light_holder.stl: 1x The star pattern of side_v2.stl starts at 1 mm; it should be printed in a white or translucent material up to that height. Use your favourite festive filament for the rest. The connectors and screws print at 0.15 mm layer height, the rest at 0.2 mm. If you have trouble getting the small perimeters of side_v1.stl to stick to the print bed, try lowering print speed and acceleration for the first layer. To assemble the lampshade, line up a pentagon with a connector and secure it with a screw. Each connector connects three pentagons. The smaller pentagon side must be facing towards the connector.