Candle with light

By Aikidoka

22
0
Free
It's free to download
Main Image
Preview Image Preview Image

Technical

I have used PLA with following settings: Flame: Layer height 0.06 mm Wall thickness 0.4 mm Infill density 0% General support no Build plate adhesion type Brim Print speed 40 mm/s Wick: Layer height 0.06 mm Wall thickness 1.0 mm Infill density 10% General support no Build plate adhesion type Brim Print speed 40 mm/s Candle: Layer height 0.15 mm Wall thickness 1.0 mm Infill density 10% General support no Build plate adhesion type Brim Print speed 40mm/s
44 objects 16 Followers
Joined over 7 years ago Hohenlohekreis

I use following software: openSCAD, FreeCAD, Blender, Inkscape, Meshmixer, Cura

You_

a MyMiniFactory company
© 2023 YouMagine. All rights reserved.  2 Berners Road, Islington, London, N1 0PW, United Kingdom
Enjoy a 20% sitewide
Discount at checkout
️Get a 20% Discount