Calibration Test_D

By Chri

53
0
Free
It's free to download
Main Image

Technical

Do not measure on the bottom of the part as Prints normally tend to have "elephant foot" measure some layers above. Print with 3 Perimeters, 3 Top/Bottom Layers, about 30% infill and not too fast (max 30mm/s print/travel) to get accurate results
14 objects 41 Followers
Joined over 10 years ago Central-Europe

Old designs will be found at https://www.thingiverse.com/Chri/designs

YouMagine

a MyMiniFactory company
© 2024 YouMagine. All rights reserved.  2 Berners Road, Islington, London, N1 0PW, United Kingdom