YouMagine

Information Comments Technical Files

Comments

You need to be signed in before commenting.

Dean R

almost 8 years

I designed my own mount/x carriage https://www.youmagine.com/designs/bulldog-extruder-assembly-x-carriage-mount

robotdigg

almost 8 years

I have same question. How do you want to mount the RobotDigg Bulldog Extruder?

Dean R

about 8 years

I found the issue, the red wire of the connector on the Nema was half broken, wich gave the issues. It's fixed now ;) Cheers

Dean R

about 8 years

That's friendly but i have a mendelmax 1.5, i was refering to this http://www.robotdigg.com/product/698/Mounting+Plate+for+Bulldog+Extruder. I ordered the right version but the extruder just james when trying to load from that side, the other side loads fine. Any idea what side you use?

andornot

about 8 years

Dean do you want me to upload an opposite hand version of the spacer?

Dean R

about 8 years

My robot digg bulldog arrived today, i chose the mounting plate to the right, but it can't extrude from that direction, the motor just jamms when tryin to load filament, from the opposite side it loads just fine but i need a left mount for that, pff, they also forgot the 3mm connector. When you order something these days it's a miracle when everything ordered is delivered.

andornot

about 8 years

using the drive gear from robot digg the steps are 490.99 and its the same for the other drive wheel but i still looking where i purchased it.

Dean R

over 8 years

Thanks alot, i ordered a robotdigg bulldog xl myself, and i will probably Order the same Drive gear as you are using.

andornot

over 8 years

Yes but i use a different extruder gear as the robot digg drive wheel is not toleranced correctly to the shaft of the stepper motor so its slightly eccentric and can slip. I will find out the drive wheel/gear i use and get back to you with its make and steps are use.

Dean R

over 8 years

Are you satisfied with the robotdigg bulldog xl? also may i ask what steps you are using? thanks