And confirming to all that indeed, printing without support structures is the best way! It can print vertically just fine too if you wanted to print multiples.
Bhold Labs
about 10 years
@Jeroen After the initial upload all of the edges were filleted and re-uploaded so the latest should have a good less sharp fillet of 1-1.2mm now. We were aiming to upload in time for the Netherlands time difference that day.
Stu_le_brew
about 10 years
I am amassed - it does actually print without support structures on my Ultimaker 2
3rdimension
about 10 years
I printed it with support as there's lots of overhangs, but I wasn't able to remove the support material - so I've not been ble to product test the design. I was also expecting something with a little more style, even at the beta stage, based upon what I've seen of other bhold labs products.
Shnick
about 10 years
I haven't print it yet, but by looking at the project I think it definitely needs support. This being the 1st version of the product I think later versions will look slightly smoother with rounded edges. :)
Jeroen van Zijp
about 10 years
Just print without any support and how much infill? Just wondering why are the edges so sharp, i'd love to see it with a radius like the iPads