PLA Print the top and bottom egg parts in as low a layer height and small perimeter width as possible. Egg top and bottom: - Layer height: 0.1 mm - External perimeter/wall width: 0.4 mm or less - Number of perimeters/walls: 3 Connector and stand: - Layer height: 0.15 mm or less The models shown were printed with a 0.4 mm nozzle (turquoise) and a 0.25 mm nozzle (pink, purple) at a layer height of 0.1 mm. They were sliced with Prusaslicer 2.6-alpha-6 using the Arachne perimeter generator.