Matching powerpack: http://www.emag.ro/acumulator-extern-a-5200-mah-black-blue-pbm52-bl/pd/DHZJMMBBM/Github project:https://github.com/thenoizz/bike-brackets/tree/master/APlus_PBM52-BNotes: - use Colorfabb XT, ABS or similar; PLA will soften in the sun.- you don't need a fan for this print. - min. 20% infill for rapid prints, but 40% much is better. - enable brim for good adhesion.- no supports- printed at 0.1 mm