Bezel for HackRF One With Powerpack H2 aluminum case

By 1-prop-head

97
2
Free
It's free to download
Main Image
Preview Image Preview Image Preview Image Preview Image Preview Image

Technical

Printed on a Ultimaker 2+ using ABS and solvent cemented using Acetone. It is a tight fit so it is suggested to put the two halves together first and install then touch a bit or acetone on the exposed edge. Once set a bit remove and complete the cementing . Fit is tight so may not need any cement. Source code is provided so you can adjust as you might require.
39 objects 39 Followers
Joined about 9 years ago United States O-HI-O both states

I tinker a lot Like to solve issues one encounters every day. Do it in software Fortunately I can fix most anything and the 3D printer is my favorite go to tool. If you skip class don't skip physics, if you do skip physics you might skip theoretic...

YouMagine

a MyMiniFactory company
© 2024 YouMagine. All rights reserved.  2 Berners Road, Islington, London, N1 0PW, United Kingdom