Description
Working door and stow-able steps.
full interior that you can choose not to use if you want a work type environment.
full interior that you can choose not to use if you want a work type environment.
Window frames with templates to cut your windows from Lexan or other clear material.
Slots for 6 10mm LED lights
Magnetic door latch
Magnetic door latch
Hardware
10pcs M3x10mm Socker cap
2pcs M3x22mm Socket Cap
10pcs M3x10mm Flathead
8pcs M3x6mm Flathead
10pcs M3 Hex Nut
8pcs M3 8x8mmm square nut(actually +/- 7.5x7.7mm)
10pcs M3x10mm Socker cap
2pcs M3x22mm Socket Cap
10pcs M3x10mm Flathead
8pcs M3x6mm Flathead
10pcs M3 Hex Nut
8pcs M3 8x8mmm square nut(actually +/- 7.5x7.7mm)
Some parts not shown in the pictures are the vents and drain.
They can be printed and glued where-ever you see fit
They can be printed and glued where-ever you see fit
Quick assembly instructions: DO NOT OVERTIGHTEN
once all the supports cleaned use the M3 hex nuts, M3x10mm screws along with the Mid rear assembly brackets with M3x6 screws and M3 Square nuts to assemble the main shell.
once all the supports cleaned use the M3 hex nuts, M3x10mm screws along with the Mid rear assembly brackets with M3x6 screws and M3 Square nuts to assemble the main shell.
Insert the Hex nuts into the 4 points on the lower inside section of the shell before installing any of the interior parts. also a good idea to do any finishing on the internal items before installation.
Windows and frames could be done after everything else is complete and installed on the body.
Comments
You need to be signed in before commenting.
No comments yet, be the first
Join the conversation! Your voice matters. Share your thoughts, ideas, and feedback with us. Let's build a community together.
Free