#ArduinoBox ###3D printable box for the Arduino Box for [Arduino](https://www.arduino.cc). This box is designed to *protect our arduino when we carry it in the bag along with other items *. The plate is placed inside the box and has a lid with magnetic closure. The steps to have the support are the following: **Step 1: Print the 3D media** We choose the .STL file from the download section and take it to our printer. The box you see in the images has been printed with *Cura* Software following the parameters: Material: ABS Blue and White Printer: Prusa i3 Laminator: Made with Cura Temperature: Extruder (Nozzle 0.4) at 240ºC and Bed at 90ºC Layer height: 0.2mm Speed: 40mm / s Plugin: 4 Pause at height {(0.9/25/25/0/5),(2.1/25/25/0/5),(3.2/25/25/0/5),(4.4/25/25/0/5)} **Step 2: We become a magnet** Once we have it printed, we will need some magnets. I have used one of the neodymium magnets. These are rectangular of 5x5x1 mm. and we will stick them in the front hinges, in the gap that there is for these. **Step 3: Place the Arduino inside the box** Once we have it inside we will have it ready.