Free
It's free to download
Technical
Bill of materials:
* The 3D printed PCB
* 1x Resistor 2K (1/4w), through-hole
* 1x micro-switch
* 1 x 3 pin male connector right angle
Steps:
* Print the PCB
* Insert the components
* Bend the components pin to fit in the lower channels. Trim the excess
* Solder the pins between them (see the pictures)
* Add a wire or something metalic for connecting the pin connector with the resistor
38 objects
104 Followers
Joined about 11 years ago
juan@iearobotics.com
Juan Gonzalez-Gomez (Obijuan) I am a researcher on robotics, but I define myself as a hacker. I really believe on the opensource spirit of sharing information
Free