Introducing our first Vanquish VS4-10 Phoenix/Fordyce accessory our - Watertight Receiver Case - this pair of receiver cases will keep your receiver and Incision VS4-10 Phoenix Series 2 light control dry when things get muddy or when there’s a river to be crossed. Both cases accommodate standard size servos up to 42 mm / 1.64 inches tall. This is a must-have accessory for crawling enthusiasts looking to keep things dry when the going gets wet.

Watertight: We tested the Compact receiver case printed in PTEG, with two servo wires submerged in 4-inches of water; over a 5-minute period - no water entered the case. Your results may vary and we can’t and don’t guarantee anything. The more wires you add, the more likelihood there is of water entering the case during submersion.

Line-Up:

Full Size Case: This case includes room for a receiver and Incision Series 2 light controller.
Compact Case: This case includes room for a receiver only.

Dimensions:

Full Size/Compact Case:
Receiver Square: 40mm by 26mm by 34mm (LxWxD)

Measurements are approximate, add 1mm or 2mm to be safe for tight fits.

Hardware: Watertight Receiver Case set needs 2 x M3x10mm countersunk screw for chassis mounting and 7 (6 for the compact) M3 x 12mm button head screws. You’ll also need two 26mm of 10mm (wide) by 5mm (tall) pieces of sealing foam. See https://www.amazon.com/gp/product/B08LCVW98V/ for what we used.

-

Don't have a printer and are still looking for one these receiver cases? Checkout my Etsy store - https://sbiprints.etsy.com/