9.5mm Pathlength Cuvette Adapter

By LeBlancResearchGroup

20
0
Free
It's free to download
Main Image
Preview Image

Information

9.5mm Pathlength Cuvette Adapter

By LeBlancResearchGroup

at 2024-05-06
The general purpose of these designs are described in “3D Printed UV-vis Cuvette Adapter for Low Cost and Versatile Spectroscopic Experiments”, which is published in the open access journal ACS Omega. Link to publication: http://pubs.acs.org/doi/abs/10.1021/acsomega.7b01310 This particular part is meant to mimic traditional quartz and glass UV-vis Spectrometer cuvettes. In this design, we have adjusted the path length to account for the average error of our 3D printer. Thus the designed path length is 9.5 mm, but the printed adapter has a measured path length of 10 mm and a sample volume of approximately 2.4 mL. This cuvette can be used in most standard UV-Vis spectrometers. We recommend printing this design with a black filament to reduce the amount of light scattering. An instructional video to assemble the spectrometer is shown below (post-printing) with the materials used listed. Either quartz or glass windows can be used depending on the spectral range needed of the cuvette. https://www.youtube.com/watch?v=idU-oGBcP1k
47 objects 12 Followers
Joined over 4 years ago University of Tulsa

In the LeBlanc Research Group we are interested in a wide variety of questions. We believe that the interface between electrochemistry and materials science is a treasure trove of new science and potential solutions. Our research requires an interdisci...

You_

a MyMiniFactory company
© 2024 YouMagine. All rights reserved.  2 Berners Road, Islington, London, N1 0PW, United Kingdom
Enjoy a 20% sitewide
Discount at checkout
️Get a 20% Discount