The Portable Generator comes in 4 different versions. Logo and non-logo, as well as 1 piece and 2 piece. It is also part of the “Overland 2” collection. 

The difference between the logo and non-logo versions is that one has the logo, while the other does not have the logo. As for the 1 piece version, the feet and body are designed as one and cannot be disassembled. The 2 piece version separates the feet with the generator’s body. The underside of the body has pockets for the feet to join securely. 

As the “1/10” scale is more of a loose standard, feel free to scale up or down in your slicer to fit your own rig, if necessary. 

As the model is recommended to be printed in a 45 deg angle, it is important that the supports’ tip diameter is small otherwise the rear and side vents may be damaged during the supports removal process.

Same with all of our other print files, it is highly recommended to print only with a resin printer to achieve the maximum amount of details, and do remember to wear PPE.

Post processing is the same with our other products. Use a spray primer depending on your resin type, then either spray paint or hand paint with model paints to your own liking. Top it off with thin coats of UV-proof clear spray.