90% goes to the Creator
(excluding payment processing fees)
$7.50
90% goes to the Creator
(excluding payment processing fees)
$7.50
Information
RC 1/10 Batmobile - The Animated Series
Body based on the Batmobile from Batman The Animated Series
30 pieces
Functional headlights, taillights and blinker: LEDs 5mm/3mm
**Assembled Size:**
Length: 603 mm
Width: 196 mm
Height: 112 mm
**Wheelbase: 380 mm**
Requires printing modifications to adapt the "Basic-DkS" chassis to the body **Included in the files**
You need:
-26- [M3 or 1/8 in. screw maximum length 12 mm ](https://a.co/d/0d2xLylE)
-2- [M3 or 1/8 in. screw maximum length 24 mm ](https://a.co/d/0d2xLylE) **For installing the hinges.**
-4- Round magnets 12 x 3mm / 0.47 x 0.12 inches
**The use of adhesive can be helpful with small parts.**
This bodywork is compatible with Chassis 1/10 Adaptable - DKS-Basic by dukedoks
Many thanks to @dukedoks for letting me use his Chassis.
**Use authorized by dukedoks**
The design only includes the RC body 1/10 Batmobile from Batman The Animated Series and tires
**Chassis not included**
30 pieces
Functional headlights, taillights and blinker: LEDs 5mm/3mm
**Assembled Size:**
Length: 603 mm
Width: 196 mm
Height: 112 mm
**Wheelbase: 380 mm**
Requires printing modifications to adapt the "Basic-DkS" chassis to the body **Included in the files**
You need:
-26- [M3 or 1/8 in. screw maximum length 12 mm ](https://a.co/d/0d2xLylE)
-2- [M3 or 1/8 in. screw maximum length 24 mm ](https://a.co/d/0d2xLylE) **For installing the hinges.**
-4- Round magnets 12 x 3mm / 0.47 x 0.12 inches
**The use of adhesive can be helpful with small parts.**
This bodywork is compatible with Chassis 1/10 Adaptable - DKS-Basic by dukedoks
Many thanks to @dukedoks for letting me use his Chassis.
**Use authorized by dukedoks**
The design only includes the RC body 1/10 Batmobile from Batman The Animated Series and tires
**Chassis not included**
Technical
Minimum print area tested, 220 x 220 x 250 mm / 8,6" x 8,6" x 10,6" inches
Resolution: 0.2mm
Perimeters: 3
Bottom layers: 3
Top layers: 4
Infill: 10%
Supports: Organic or Tree
Adhesion: Use raft or additional supports if you have adhesion issues.
Using low speeds reduces printing defects, it is recommended to use less than 50% of the total speed of your machine.
If you plan to do post-processing of the paint, use 4 or more perimeters
Flexible Tires:
**TPU**
Low speed: approximately 20mm/s
Perimeters: 3
Lower layers: 3
Upper layers: 5
Filling: 0%
Adhesion: No
**This printed design can weigh a little over 3kg, so try to get more powerful gears and a strong motor**
Resolution: 0.2mm
Perimeters: 3
Bottom layers: 3
Top layers: 4
Infill: 10%
Supports: Organic or Tree
Adhesion: Use raft or additional supports if you have adhesion issues.
Using low speeds reduces printing defects, it is recommended to use less than 50% of the total speed of your machine.
If you plan to do post-processing of the paint, use 4 or more perimeters
Flexible Tires:
**TPU**
Low speed: approximately 20mm/s
Perimeters: 3
Lower layers: 3
Upper layers: 5
Filling: 0%
Adhesion: No
**This printed design can weigh a little over 3kg, so try to get more powerful gears and a strong motor**
Comments
You need to be signed in before commenting.
No comments yet, be the first
Join the conversation! Your voice matters. Share your thoughts, ideas, and feedback with us. Let's build a community together.
Related objects
57 objects
30 Downloads
2 Followers
Joined 3 months ago
Andorra
Life And, 3D Printing Life
YouMagine
a MyMiniFactory company
© 2024 YouMagine. All rights reserved. 2 Berners Road, Islington, London, N1 0PW, United Kingdom
Free