Our latest creation is a true-to-original 2-stage water jet drive for RC models.

The jet drive has a nominal diameter of 25 mm and is designed for operation with 0.8 - 1.2 kW brushless motors up to 3s LiPos.

All necessary data for printing the housing, stator, stator housing, impellers and accessories are included.

NOTE:

The jet drive can be installed in any boat thanks to the included hull insert. The hull insert can simply be glued into your hull.

The HPW25 is extremely powerful and achieves amazingly high top speeds for jet propulsion systems. Thanks to the 2-stage design, our water jet drives are insensitive to the intake of air.

The drive is a lot of fun, both to assemble and to drive.

In addition to the print data, the data package contains detailed, illustrated assembly instructions (11 pages) as well as illustrated printing instructions (23 pages). A complete parts list is also included as an Excel document. This contains a list of all required print parts, as well as a detailed description of the required add-on parts (incl. recommended motor, servo, etc.)

The model should preferably be printed in ABS, alternatively an attempt can also be made to print in PLA+, PLA tough or CF filaments.

Technical data:

Length: 166 mm

Length with 2948 motor: 214 mm

Width: 59 mm

Height: 57.9 mm

Weight (printed parts): approx. 150 g

Weight (complete): 380 g

The model is aimed at experienced 3D printing users.

Here you can find more boats/products from us:

https://youmagine.com/hillprinties

You can find more information on our Instagram profile:

https://www.instagram.com/hillprinties/

Or via the link in the bio.

The following components are additionally required and are not part of the offer:

2948 3450kV brushless motor

ESC 70A

1x 3s Lipo

1x 25 kg waterproof standard servo

1x shaft seal ring 5x16x5

1x sealed stainless steel ball bearing 5x13x4

1x sealed stainless steel ball bearing 5x11x4

1x ground 5 mm stainless steel shaft 120 mm long

3x 3 mm stainless steel shaft 67.5 mm long (inlet)

Remote control and receiver

Various small parts

(all components listed in BoM)