This original 1/10 scale compact fire extinguisher comes in 2 versions. Logo and non logo. It is also part of the “Overland” and “Special  Vehicles” collections.

Both versions have 3 parts to them. The nozzle standalone, the body standalone, and nozzle and body combined. The standalone nozzle and body will require some assembly with super glue, which is a simple process of supergluing the nozzle shaft and plugging it into the extinguisher body. The nozzle can be rotated in any angle before the super glue sets.

Alternatively the combined version does not require any assembly, and is a 1 piece print. It should be easy enough to print for most resin printers. This version has a rigid nozzle, and cannot be rotated. 

There is also a full sized 1/0 scale fire extinguisher available as a standalone and as part of the “Special Vehicles” collection.

The only difference between this and the full size version is the height.

As the “1/10” scale is more of a loose standard, feel free to scale up or down in your slicer to fit your own rig, if necessary. 

Same with all of our other print files, it is highly recommended to print only with a resin printer to achieve the maximum amount of details, and do remember to wear PPE.

Post processing is the same with our other products. Use a spray primer depending on your resin type, then either spray paint or hand paint with model paints to your own liking. Top it off with thin coats of UV-proof clear spray.

To get the logo’s background to a different colour, it is recommended to first spray a layer of your desired paint, then hand paint the rest. Remember to spray UV-proof clear coats at the end. Feel free to use the renderings as an inspiration for your colour schemes!