2X 1.2" 42lb 188nm 12V linear actuator
2x 4x30mm fine thread screw
1x 4x80mm fine thread screw (can be substituted)
2x 5x 25mm fine thread screw
12X 3/4" (19mm) #4 screws
16X 1/2" (12mm) #4 screws
CEN F450 Bumper set (for extended frame rails) Amain part number CEGCD0450
CA glue (super glue)
4X 10x3mm screw through magnets (for cab mounting)
8X 3x2mm magnets (for toolbox doors)
8" .8mm steel rod (for hinges)

Optional parts:
2X white 3mm leds
11X red 3mm leds
Paint
5x25mm wood for side rails (cut to length)

3D PRINTING SETTINGS

This bed is designed to fit printers with a 256mm bed
I have printed this bed on my Bambu P1S in both PETG, and PLA+ without issue.
All parts should be printed with the flattest parts down, and supports turned on.
When completed, bed measures 303x260mm
The largest part is the bottom front at 211x230x116mm

If there are any questions, or you want to see more photos of a completed bed mounted, check out my social media pages.