PLEASE make sure your 3D printer is able to print a minimum size of 180x220x158mm before purchasing.

The V306 front cab is a variant of the V303, made to fit on the VS4-10 Pro, SCX10 iii, and TRX4 chassis with the provided mounts.

As this is a front cab only practically all wheelbases will work. The V306 front cab on its own therefore is a good body option for full custom builds. However it was also designed to work together with the 4x4 Flatbed for the V306 (sold separately).

Ideally 110-115mm diameter tyres and 230mm outside tyre to tyre width would give the best scale proportions, however 120mm tyres would also work for a more aggressive off-road setup.

Be sure to check out the instruction manual and gather all required hardware for assembly.

 

As always features and details are the most important with our designs. 

The doors have in-built hinges, so no need to source your own hinges.

- Windshield can be flipped up or down just like in real life.
- Front bumper towing recovery pin
- Rear bumper towing hook.
- High clearance bumper also included.
- All light buckets are functional, use 5mm and 3mm LEDs.
- Interior door panels with handles.
- Sidesteps.
- Detailed exhaust system.
- Detailed interior dashboard.
- Adjustable mirrors
- Mounts have storage compartments.

 

Please ensure your printer can print a volume of 180x220x158mm.

*It is highly recommended to read the instruction manual before purchasing, to ensure you have all the required tools and hardware to assemble this body.*

Assembly instructions:

View the link below to download the assembly instructions

https://www.aheadrc.com/manual

.DXF files for all windows can be found here:

https://www.aheadrc.com/dxf-files

 

Should you need any help, please do not hesitate to contact us!