This is a super detailed model set consisting of 9 individual sockets, a ratchet wrench, a long socket hinge handle, an extension, box lid and the box with slots and pockets to house all the equipment. The sockets will actually fit onto the ratchet wrench, hinge handle and the extension, but it would require a well calibrated resin printer. 

The ratchet wrench is designed with a mock flick lever to look like its real life version. Its handle is also designed in a rounded rectangular profile for better grip, with 2 slots on the end for extra grip. 

The hinge handle has a mock joint which in real life would allow the handle to hinge 180 degrees for better leverage. Its handle has a round profile with horizontal extruded slats for better grip. 

The extension is self explanatory, it’s simply a piece that increases the reach of the handle to get into places out of reach.

Each socket has an accurate inner diameter to outer diameter, and height ratio. 

The box has slots for the tools to fit snugly in place so they don’t fall out when travelling. Its handle also features mock rivets to reflect a classic looking design. Whereas the lid has slots that allow it to simply slip onto the case. 

As the “1/10” scale is more of a loose standard, feel free to scale up or down in your slicer to fit your own rig, if necessary. 

Same with all of our other print files, it is highly recommended to print only with a resin printer to achieve the maximum amount of details, and do remember to wear PPE.

Post processing is the same with our other products. Use a spray primer depending on your resin type, then either spray paint or hand paint with model paints to your own liking. Top it off with thin coats of UV-proof clear spray.