This wall mount bracket is suitable for two 14mm copper pipes (cold and hot water) and for a 40mm PVC sewage drain pipe. The bracket is mounted on the wall with a single screw. Pipes are inserted in the bracket and fastened with the clip. The two holes on the sides of the bracket can be used to fasten the pipes with nylon zip ties instead of the clip. The bracket's height can be modified in the OpenSCAD .SCAD file with the "FullHeight" value. The bracket's profile can be modified in the LibreCAD .DXF file. Feel free to use and share this design. Good design is hard work, donations are welcome.