To go along with our RedCat Ascent Fusion Explorer Bed - we’ve got quite a few accessories for you to add. Note that these accessories are ONLY COMPATIBLE with the Explorer bed which is sold SEPARATELY and not included in this file set.

Accessories:

Racks: Our racks are tough, but not indestructible, so care does need to be taken when using them. These have been field tested with great success so you shouldn’t need to worry too much. Racks come in short and long lengths to allow the mount of other accessories.

Rack SB3L - This sturdy rack includes 2 vertical and 3 cross bars; along with 2 red inserts for “lights”.

Rack SB2V - This sturdy rack includes 2 vertical bars and a large amount of gusseting to make it as strong as possible.

Rack SB3 - This sturdy rack includes 2 vertical and 3 largely spaced cross bars.

Rack SBH - This strong rack is all about hexes and includes a hex pattern within the inside of the rack bars.

Rack SBT - This tube style rack includes a smaller Y setup in the middle to improve strength.

Rack SBHB - This rack includes 2 vertical bars along with a cab guard to protect the cab.

Both of the below accessories require - long - versions of our racks.

Bed Box - Add a bed box to your truck! With internal dimensions of - 110mm x 24mm x 36mm (L/W/H) - you’ll have room for 4 x AA batteries or other tools/hardware to keep your truck running on the trail. The box top is secured with two M3 x 10mm screws (2.5mm hex). It is not waterproof.

Side Fuel Racks - Add fuel canisters to the side of your bed. Each side fuel rack includes the rack and fuel canister. The canisters can be mirrored depending on your mounting preference. The side racks come in two versions, standard and long; if you plan on using the Bed Box, you'll need to print the long version.

-

Material: All accessories can be printed in PLA material. PETG/ASA will work, but we've not found it necessary unless you're crawling in a lot of direct sunlight.

Hardware: We recommend M3 x 16mm to secure the racks. You’ll need 4 screws for the “short” and 6 screws for the long racks. You’ll need to print the “long” version of the rack to support the bed box or side fuel canisters.

Notes: No other items are included unless otherwise noted. Batteries are not included.

-

Don't have a printer and are still looking for one of these accessories? Checkout my Etsy store - https://sbiprints.etsy.com/