This original and highly detailed, 1/10 scale overland stove comes in just 2 versions. Logo and non logo. It is also part of the “Overland” collection

(Overland Pot and Overland Saucepan SOLD SEPERATELY)

The stove is a 3 piece print regardless of the logo or non logo versions. It includes the stove itself, the functional lid, and grill bars to hold the pots and pans. 

As it is a 3 piece print, it will require some very simple assembly with super glue and 2x m2*10 screws. The super glue is used to secure the grill bars onto the stove. Arches in the grill bars match the stove’s curves, which ensures the best surface area for glueing. 

The bars are lined wide enough so the camp kettle, overland pot, or the overland saucepan can rest on it. The screws are for the lid that can be opened and shut. As oversized grooves are already cut into the underside of the lid, they accommodate the grill bars and solve the clearance issue. 

Simply take the pots and pans off and shut the lid when your crawler is on the move.

Match this with the “camp kettle'', “overland pot”, “overland saucepan”, and with the “camp gas bottle”, and you have a killer looking set of scale equipment.

As the “1/10” scale is more of a loose standard, feel free to scale up or down in your slicer to fit your own rig, if necessary. 

Same with all of our other print files, it is highly recommended to print only with a resin printer to achieve the maximum amount of details, and do remember to wear PPE.

Post processing is the same with our other products. Use a spray primer depending on your resin type, then either spray paint or hand paint with model paints to your own liking. Top it off with thin coats of UV-proof clear spray.