Monster Truck |
On-Road / Drift |
Trail Truck / Crawler |
Full bodies |
1:10 |
Exterior accessories |
Find same →
90% goes to the Creator
(excluding payment processing fees)
$19.87
Information
MyRCCar Typical Pickup 2. 1/10 Multi-Wheelbase and Multi-Style RC Truck Body
By dlb5
at 2024-08-09
This time I bring you a very much more complete version of the Typical Pickup Body.
I have created variations for various of the parts, including the front and front bumper, the cabin or the bed. With them, you will be able to build many different wheelbase "Typicals", ranging from 250mm wheelbase to 310mm for On-Road, Truggy, Crawler or Monster builds.
You can see a 3D scan of a Typical Pickup with Crawler Front and Bumper, 260 short Cab, and Closed On-Road Style Bed, over a MyRCCar KIDS Chassis
You can see a 3D scan of a Typical Pickup with Crawler Front and Bumper, 260 short Cab, and Closed On-Road Style Bed, over a MyRCCar KIDS Chassis
FEATURES
Multi-Wheelbase:
Choosing different cabin and bed lengths you will be able to achieve your desired wheelbase, in steps of 5mm. That means 250, 255, 257, 260, 262, 265, 267, 270, 272, 275, 277, 280, 282, 285, 290, 295, 300, 305 and 310mm wheelbases.
How you choose the right parts?¿? The Cabin files are named with the wheelbase you get if you use the "short" bed, the standard one. So you will find cabins from 250 to 265mm and the "old" dual cab for 290mm weheelbase. Once you have the cabin, you will be able to increase the wheelbase 5, 10, 15 or 20mm using larger beds.
As an example, you can choose a 260mm cabin and use the +20mm bed to have 280mm total wheelbase, but also with a 265mm cab and +15mm bed.
Choosing different cabin and bed lengths you will be able to achieve your desired wheelbase, in steps of 5mm. That means 250, 255, 257, 260, 262, 265, 267, 270, 272, 275, 277, 280, 282, 285, 290, 295, 300, 305 and 310mm wheelbases.
How you choose the right parts?¿? The Cabin files are named with the wheelbase you get if you use the "short" bed, the standard one. So you will find cabins from 250 to 265mm and the "old" dual cab for 290mm weheelbase. Once you have the cabin, you will be able to increase the wheelbase 5, 10, 15 or 20mm using larger beds.
As an example, you can choose a 260mm cabin and use the +20mm bed to have 280mm total wheelbase, but also with a 265mm cab and +15mm bed.
On-Road / Crawler styles:
But that "multi-wheelbase" feature is not the only thing you can choose. The body should adapt to "On-Road" or "Crawler" Styles choosing the right front and bed parts. The space for the wheels will be much more bigger in the "crawler" style parts. The same way, a special "crawler bumper" can be mounted within the "crawler front".
But that "multi-wheelbase" feature is not the only thing you can choose. The body should adapt to "On-Road" or "Crawler" Styles choosing the right front and bed parts. The space for the wheels will be much more bigger in the "crawler" style parts. The same way, a special "crawler bumper" can be mounted within the "crawler front".
Closed / Classic beds:
The elections doesn't finish there... you can now also choose for "closed" or "classic" beds... The first ones will let you mount your body in a lower position because there is much more space "inside the bed" for your chassis. The classic style bed will be better for "high positions" of the body over the chassis, normally in a crawler or monster setup.
The elections doesn't finish there... you can now also choose for "closed" or "classic" beds... The first ones will let you mount your body in a lower position because there is much more space "inside the bed" for your chassis. The classic style bed will be better for "high positions" of the body over the chassis, normally in a crawler or monster setup.
Pro Smooth:
After learning how to correctly smooth from low-poly I have invested quite an amount of time smoothing the parts so you can now have the best desired finish for the outer of the car body.
After learning how to correctly smooth from low-poly I have invested quite an amount of time smoothing the parts so you can now have the best desired finish for the outer of the car body.
Better thickness:
Specially for the bed part, I have increased the thickness from 1mm to 1.6mm. That way, now you can print it with 2 perimeters of 0.4mm. Now the bed part is only one mesh, pre "booled" so you don't have to do nothing to correctly print it.
The same way, in all the "short" cabs, not the dual-cab one, I have thinned a little the part in some places to make it a little lighter.
Specially for the bed part, I have increased the thickness from 1mm to 1.6mm. That way, now you can print it with 2 perimeters of 0.4mm. Now the bed part is only one mesh, pre "booled" so you don't have to do nothing to correctly print it.
The same way, in all the "short" cabs, not the dual-cab one, I have thinned a little the part in some places to make it a little lighter.
Compatibility:
In my last chassis designs I have added the "Universal Body Holding System". Basically two PLA screwing body posts which screws in a TPU part, which is holded by another PLA part, attached to the chassis. The result is a holding system very similar to what you find commercially, but with the plus of the TPU part which will absorb a lot of stress between chassis and body. You will be able to use longer or shorter screwing body posts and regulate the height, but also put the holders to the front or back of the body a few mm to better adapt the final build, just using some "spacers".
This will require making the holes to the body after printing in the position you want for your build. But doing this, you will be able to use sourced chassis as well.
In my last chassis designs I have added the "Universal Body Holding System". Basically two PLA screwing body posts which screws in a TPU part, which is holded by another PLA part, attached to the chassis. The result is a holding system very similar to what you find commercially, but with the plus of the TPU part which will absorb a lot of stress between chassis and body. You will be able to use longer or shorter screwing body posts and regulate the height, but also put the holders to the front or back of the body a few mm to better adapt the final build, just using some "spacers".
This will require making the holes to the body after printing in the position you want for your build. But doing this, you will be able to use sourced chassis as well.
OTHER CONSIDERATIONS:
- Not always aligning correctly the chassis axles with the body space for axles is the best fit. For example for big wheels like monster / crawler ones, I have longer chassis wheelbase than body wheelbase. In fact, a 260mm body over 275mm chassis let the front wheels to be displaced forward. That way they don't hit the "crawler bumper" when steering in and when steering out the inner wheel better uses the space for the wheel in the body.
- If you want to use big wheels I recommend the Crawler config, but also if you are going to build a MTC Chassis for it, use the longest CVDs, the HSP 188015 ones for the best clearance when steering and using suspension system same time.
- Please, if you like my work, consider uploading photos of your 3D printed design as a very good way to help me.
Related objects
MyRCCar 100% 3D Printable 1/10 RC Car Standard Shocks without oil, including springs, from 55mm to 100mm
$5.50
26 objects
5 Followers
Joined 7 months ago
Hi there! I'm an individual who has been designing and playing with RC cars and Slot cars for some years. Take advantage downloading and playing with my designs :) Let your screen rest for a while building and playing physically!
Free