Home / aheadrc / Designs / Crawler G3308 Sideboard Flatbed - 1/10 RC body attachment

Crawler G3308 Sideboard Flatbed - 1/10 RC body attachment

By AheadRC

90% goes to the Creator
(excluding payment processing fees)

$8.00

Add to Cart

Videos

Images

Documentation

Technical

Assembly instructions:

View the link below to download the assembly instructions

aheadrc.com/manual

Designed to be printer friendly, the parts come in a variety of included options.

Bed:

Short (Short bed for use with 420mm and shorter wheelbases)
Long (Long bed for use with 420mm and longer wheelbases)
Shock cover (Raised section in bed to clear shock towers for those using coilovers)
Shock cut (Cut rectangular hole section in bed to clear shock towers.)
Standard bed (No cut or raised section for shock towers. For use with leaf springs)

Short bed:

Full size (Multiple 1 piece prints. Requires a printer that can print a minimum of 294x232x50mm)
Quarter split (Multiple small piece prints, needs assembly. Requires a printer that can print a minimum of 150x118x50mm)

Long bed:

Full size (Multiple 1 piece prints. Requires a printer that can print a minimum of 344x232x50mm)
Half split (Multiple medium size prints, needs assembly. Requires a printer that can print a minimum of 172x232x50mm)
Quarter split (Multiple small piece prints, needs assembly. Requires a printer that can print a minimum of 172x118x50mm)

Fender:

Fender (standard wheel arch with inner fender integrated.)
Fender alt ver (wheel arch without inner fender)

Mounts:

Rock Shield (Angled deflector plates to slide easier over rocks. To match with cab’s Rock Shield mounts. Originally designed for SCX10 iii. Let me know if you need a rock shield mount with different dimensions) [side note: print rock shield mount vertically to use less supports]
Standard (No deflector plates, for use with wheelbases of 420mm and longer or shorter. Originally designed for SCX10 iii)

Bumper:

Bumper post (standard 1 piece bumper post with adjustment holes)
Bumper post alt (stub bumper posts to fit bumper flush against bumper mount)

Some files will need to be printed multiple times, this includes the following:

Sideboard FRONT / REAR x2
Bumper post alt x2

*It is highly recommended to read the instruction manual before purchasing, to ensure you have all the required tools and hardware to assemble this body.*

Should you need any help, please do not hesitate to contact us!