Home /   pikata /   Designs /   Test print for Ultimaker 2
Find same →

Test print for Ultimaker 2

By pikata

43
0
54
Free
It's free to download
  Download
Images
Documentation

Comments

You need to be signed in before commenting.
Geeks
Geeks
about 4 years
Hello, How! It's been a long time without coming here ... Glad to come back a little. I am facing an extrusion problem on a machine. It is different from Ultimaker. I know that my request will seem special to you and that it may fall into oblivion. I try anyway. I would like to reproduce the test cylinder 3mm3 / s - 10mm3 / s but for a wire diameter of 1.75mm. Is it possible to have a little help in GCODE for this wire diameter and a 0.4mm nozzle without retraction? Thank you so much. Geeks
Leo_Aguiar
Leo_Aguiar
about 6 years
And this only works for 0.4mm nozzle correct? For different nozzles a different file would need to be sliced, correct?
Leo_Aguiar
Leo_Aguiar
about 6 years
Hi Arthur, how did you make this? Do you have any links to resources explaining how to slice a model so that you have different settings at different layers/heights? What layer height is this set to print with? I looked at the gcode and it looks like it prints with 0.25 layer heights. So is it correct to say that your speed settings in your slicer where 30mm/s, 40mm/s, 50mm/s, 60mm/s .... etc... all the way up to 100mm/s? Thanks for the help.
Werewolf
Werewolf
over 6 years
Great thing, except for it not continuing further, which might be useful today? Also, upon finishing the tube, it got wierd, and my UM2+ did a wierd sound as if stuck. I had to cut power temporarly to reboot it. Wierd. Surely my poor machines fault though. I'll try this again shortly, with my smaller nozzles, just out of extreme curiosity!
shawny2005
shawny2005
over 7 years
Will this work with UM3?
shawny2005
shawny2005
about 9 years
<p>figured it out. &nbsp;just saved the .gcode to the SD card. &nbsp;skipped cura completely.</p>
shawny2005
shawny2005
about 9 years
<p>I don't understand the comments. &nbsp;I can't get this thing to save.</p>
joarb
joarb
over 9 years
<p>I did this print on my UM2. How do I read the result? Mine started to fail at 9 and failed completly at 10...</p>
aviphysics
aviphysics
over 9 years
Seems like it most certainly does not. Extrusion rate is way too high.
aviphysics
aviphysics
over 9 years
Will this code work with a UM1?

Tags

test Calibration ultimaker 2 print

Related objects

Faceless Void from Dota2 game

Free
pikata

Test print for Ultimaker 2

Free
pikata
pikata

pikata

2 objects 4 Followers 4 Downloads
Enjoy a 10% sitewide
Discount at checkout
 Copy code YOU10
Get a 10% Discount