See it in action here: https://www.youtube.com/playlist?list=PLlR55U8ujh5gw4XuwwtaiLJ96BsT7JZC5

Hardware kits available here: https://rcprinter.com/products/skeeride-build-kits

Buy premade if you don't have a printer from the authorized sellers found here: https://docs.google.com/spreadsheets/d/1O3sNhHLcBIgglBqKxOp7VOuq3I0wZ7ExkQTDubjE45U/edit?usp=sharing

Very few parts needed to puchase, most parts are printed. Everything goes together using M3 screws. Takes a standard 540 size motor and standard 55g servo. 

Most parts print without any supports. The few parts that take supports wont need a lot of them. Almost all is printed in PLA, with the handle bars and snow flap printed in TPU. Designed to fit a 200x200mm print bed.

Printing details:

0.2mm layer height

4-6 perimeters

15% infill for non structural parts(hood, seat, etc)

75% infill for structural parts(frame, a-arms, spindal, gears, etc)

If your driving seems to break a specific part often then try printing it in TPU but with many perimiters and high infill, this should help absorb the impacts.