RTS-002 (Radar Technician Scanner Mark 2)
By Ryan Czaplinski
Free
It's free to download
Videos
Images
Documentation
Technical
- PLA or ABS
- Super glue
- 4 Cap Screws - M4 x 10mm / plain steel (optional)
- Approx. 2.5mm diameter red wire (optional)
- Paints used for the RTS-002 prop will be listed soon.
Notes:
- The RTS-002 has 34 unique 3D printed parts (48 total for the complete assembly).
- ALL the parts were designed to be 3D printed without support to shorten the print time, reduce material usage, and achieve clean surfaces.
- The following parts are recommended to be printed in 0.1mm layer height / 100 microns or less since they are small: S-02, S-03, S-05, U-06, L-08, L-09, C-01, and R-01.
- Reference PartNames_OD.jpg, ExplodedView01.jpg, and ExplodedViews02.jpg as a guide for the assembly.
- Super glue is required to attach the parts together.
- Optional: Replace the 'C-01_x4' with four Cap Screws (M4 x 10mm / Plain Steel). These screws can be found at your local hardware store.
- Optional: Add a red wire (cord) to the RTS-002. Use R-01 parts as the wire guide. Reference 3DRendering.jpg and RTS-002_Assembled.stl.
Free