Filament:
You can make the parts out of any type of filament you choose.  There is no need to have a preference.
But, for the bed feet, and the inserts used on the motor controller box, you should have a flexable filament like Ninjaflex or TPU.


Carbon Fiber Tubes:
https://www.kitesandfunthings.com/Products/Sky-Shark-P-Series-Tubes-Blems__SSPSERIESB.aspx
Name:  P-200
Qty:  2

Carbon Fiber Rod:
https://www.kitesandfunthings.com/Products/MICRO-Solid-Carbon-Rods__CFMICRO.aspx
Diamter:   0.24" OD (6.1mm) and 48" long
Qty:  1




Screws
6 - 2mm x 10mm (used as set screws for the handle hub and gear)
8 - 2.5mm x 16mm (attach brackets and motor controller box)
9 - 3mm x 10mm (Attach uprights to bed and top plate, and 1 to connect the lower motor mount to the brace)
4 - 3mm x 30mm (Attach motor mounts to carriage)
6 - 3mm x 16mm (for carriage top stop)

Nuts
8 - 2.5mm
12 - 3mm locknuts 
2 - 3mm (for carriage top stop)

Washers:
12 - 2.5mm
14 - 3mm


1 - Spring:  
	Uncompressed length:  63 mm
	Inner diameter:  14
	Wire diameter:  1.5
	Or find something that works for you then make your own spring retainers to hold them in place
	A 'Big Bore' shock from you local hobby store will do the job.

2 - 3mm x 8mm x 4mm Bearings (used for the gear/handle axle)

Motor:  380 size (27.7mm can, 16.2mm mounting hole spaceing)

PWM motor controller (https://www.ebay.ca/sch/i.html?_from=R40&_trksid=p2380057.m570.l1313.TR0.TRC0.A0.H0.X4.5V%7E35V+5A%2F10A+Mini+PWM+DC+Motor+Speed+Regulation+Controller+.TRS2&_nkw=4.5V%7E35V+5A%2F10A+Mini+PWM+DC+Motor+Speed+Regulation+Controller+&_sacat=0)

Mini-Collet (https://www.ebay.ca/sch/i.html?_from=R40&_trksid=p2380057.m570.l1313.TR0.TRC0.A0.H0.X0.5-3mm+Electric+Drill+Bit+Collet.TRS3&_nkw=0.5-3mm+Electric+Drill+Bit+Collet&_sacat=0)

16 or 18 gauge wire

XT60 connector (or your choice)

30mm fan (https://www.ebay.ca/sch/i.html?_from=R40&_trksid=p2380057.m570.l1313.TR12.TRC2.A0.H0.X30mm+fan.TRS0&_nkw=30mm+fan&_sacat=0)

3mm hex shaft (for gear and handle) (https://www.ebay.ca/sch/i.html?_from=R40&_trksid=p2380057.m570.l1313.TR0.TRC0.A0.H0.X3mm+Diameter+Shaft+Set.TRS3&_nkw=3mm+Diameter+Shaft+Set&_sacat=0)

2mm brass rod