PRINT SETTINGS Printer: Monoprice Select Mini Rafts: No Supports: No Resolution: 0.13125 and 0.175 Infill: Changes per item. 20-30% on most parts, 100% on the tiny ones All the grey concept parts are printed in Innofil3D Grey PLA on 210 degrees Celcius on a 55 degrees heated bed in 0.175 layer height. The colourful version mostly consists out of Colorfabb PLA and was printed with a 0.13125 resolution on 200/50. There's no need for rafts and hardly any support material. Only the main tower really needs it and I've used (Cura) support on the display to double as the display's menu, which came out pretty nice I think. All parts are already laid down on their best side, to get the best printing results and the nicest finish on the side you'd want it most. POST PRINTING I've sanded a few burrs here and there, but mostly it should all just snap together. This might be different if you use other materials or settings. Obviously I've made everything so that I'll get the best results with my setup. To put everything together you will also need two 50mm metal or plastic rods of a diameter of 3mm for the bed and two pieces of 60mm for the x-axis. HOW I DESIGNED THIS I've designed everything in Tinkercad, as I haven't had the time to really dive into other programs yet, but I'm well amazed so far by how much I can already do with 'just' Tinkercad! The Lamball Bakra logo on the tower and the name and logos on the bottom were made in Illustrator, exported as .svg's and brought into Tinkercad. YOU CAN ALSO FIND ME ON Webshop: http://www.lamballbakra.com Instagram: http://www.instagram.com/baschz Twitter: http://www.twitter.com/baschz Facebook: http://www.facebook.com/baschz YouTube: http://www.youtube.com/user/baschz Tip me: http://www.paypal.me/baschz