The steps to have the support are the following: Step 1: Print the 3D media We choose the .STL file from the download section and take it to our printer. The box you see in the images has been printed with the following parameters: Material: ABS White and Red Printer: Prusa i3 Laminator: Made with Cure Temperature: Extruder (Nozzle 0.4) at 240ºC and Bed at 90ºC Layer height: 0.2mm Speed: 40mm / s Plugin: Pause at height (4.4 / 25/25/0/5) Step 2: We become a magnet Once we have it printed, we will need some magnets. I have used one of the neodymium magnets. These are rectangular of 5x5x1 mm. and we will stick them in the front hinges, in the gap that there is for these. Step 3: Place the Alhambra Icezum inside the box Once we have it inside we will have it ready. If you want to access the complete repository follow the link of the IceZumBox https://github.com/carlobre/IceZumBox/wiki