Horse Prototype Parts
File / Part	Number to Print	Layer Height (mm)	Infill (%)	Raft	Support (material)
Arm Front Left.stl	2	0.15	20	No	No
Arm Front Right.stl	2	0.15	20	No	No
Arm Rear.stl	2	0.15	20	No	No
Base.stl	1	0.15	20	No	No
Body Left.stl	1	0.15	20	No	No
Body Right.stl	1	0.15	20	No	No
Cam Front.stl	2	0.15	20	No	No
Cam Rear.stl	2	0.15	20	No	No
Gear Idler, (22 Teeth).stl	2	0.15	20	Yes	No
Gear Worm.stl	1	0.15	20	No	Yes (PVA)
Gear, (22 Teeth).stl	2	0.15	20	Yes	No
Head.stl	1	0.15	20	No	No
Hoof Front.stl	2	0.15	20	No	No
Hoof Rear.stl	2	0.15	20	No	No
Housing Motor.stl	1	0.15	20	No	Yes (PLA)
Leg Front Lower Front.stl	2	0.15	20	No	No
Leg Front Lower Rear.stl	2	0.15	20	No	No
Leg Front Upper Front.stl	2	0.15	20	No	No
Leg Front Upper Rear.stl	2	0.15	20	No	No
Leg Rear Lower Front.stl	2	0.15	20	No	No
Leg Rear Lower Rear.stl	2	0.15	20	No	No
Leg Rear Upper Front.stl	2	0.15	20	No	No
Leg Rear Upper Rear Left.stl	1	0.15	20	No	No
Leg Rear Upper Rear Right.stl	1	0.15	20	No	No
Screw, 4 by 3.8mm, 4.4mm Shoulder.stl	36	0.1	20	No	No
Screw, 4 by 3mm, 4.4mm Shoulder.stl	8	0.1	20	No	No
Spacer Body.stl	4	0.15	20	No	No
Tail.stl	1	0.15	20	No	No
Total	89