To print a rig like the one on the picture, you will need to print: - 1 pcs. camera_plate.stl - 2 pcs. std_clamp_b.stl - 2 pcs. dual_parallel_std_clamp_a.stl - 1 pcs. std_clamp_handle_holder_30deg.stl - 1 pcs. std_clamp_handle_guide_30deg.stl - 1 pcs. std_clamp_handle_holder_-30deg.stl - 1 pcs. std_clamp_handle_guide_-30deg.stl - 1 pcs. shoulder_holder_160.stl go shoulder_sholder_320 - 2 pcs. shoulder_holder_bracket.stl Screws needed: - You will need an M6 hex screw for each thumbscrew. 4 pcs. in 40mm (for the shoulder holder and handles), 10 pcs. 30mm - 4 pcs. countersunk M6 screws (to mount the camera plate - 20 pcs. M6 nuts - 4 pcs. M4 20mm screws with M4 lock nuts (for mounting the Manfrotto 357 plate)