Assembly instructions:
View the link below to download the assembly instructions
aheadrc.com/manual

 

 

Designed to be printer friendly, the parts come in a variety of included options.

Cab: (Ideal to print in upside down orientation)
- Cab full (cab is a 1 piece print. Requires a printer that can print a minimum of 180x235x415mm)
- Cab split(splits the cab into 2 halves, a 2 piece print. Requires a printer that can print a minimum of 180x235x205mm)

Fender:
- Standard (standard width meant for 240mm width outermost tyre to tyre)
- Wide track (meant for 265mm width outermost tyre to tyre)
- Full (full length, 1 piece print. Requires a printer that can print a minimum length of 330mm)
- Split (split length, 2 piece print. Requires a printer that can print a minimum length of 180mm)

Cab rear panel:
- Visor (The rear panel designed for use with the rear visor)
- Non visor (The rear panel designed for use without the rear visor)

Rear antenna:
- Short (For use with or without the rear visor)
- Long (For use without the rear visor)

Some files will need to be printed multiple times, this includes the following:
Cab joiner inside x2
Cab joiner outside x2
Side vent x2
Cab side light lens x6
Cab side hinge x11
Window hinge x15
Tail light lens x6
Traction board x2

 

 

DXF files for the windows can be found here: https://www.aheadrc.com/dxf-files

 

It is highly recommended to read the instruction manual before purchasing, to ensure you have all the required tools and hardware to assemble this body.

Should you need any help, please do not hesitate to contact us!